Descrizione

TX measurements on WiMAX™
Key Facts
  • R&S®FSQ-K94
    • Expands the R&S®FSQ and R&S®FSG signal analyzers (when equipped with the R&S®FSQ-K93 application firmware) by adding the capability to perform spectrum and modulation measurements on WiMAX™ MIMO signals
    • Offers a very flexible solution by providing SISO measurements on antenna 0 and 1 (matrix A and B) or measurement of both antennas (MISO) at the same time (matrix A)
  • R&S®FSQ-K92, R&S®FSQ-K93
    • Expands the R&S®FSQ, R&S®FMU, and R&S®FSG analyzers by adding the capability to perform spectrum and modulation measurements on signals in line with the IEEE 802.16?2004 and IEEE 802.16e-2005 standards
    • Supports OFDM and OFDMA
    • Provides complex WiMAX™ measurements at a keystroke
    • Performs measurements in the RF/IF range and in the baseband
    • Offers the ideal solution for a wide scope of WiMAX™ applications
    • Optimally designed for research, design, verification, and production applications
    • Allows remote control of all functions via IEC/IEEE bus or LAN

Brief Description The R&S®FSQ-K94 application firmware enhances the capability of R&S®FSQ-K93 to include analysis of WiMAX™ MIMO signals for the R&S®FSQ and R&S®FSG. Numerous measurements as specified by the standards and a wide range of functions are therefore available at a keystroke. R&S®FSQ-K93 adds WiMAX™ options to the scope of functions provided by the R&S®FSQ, R&S®FMU and R&S®FSG analyzers. The R&S®FSQ-K93 application firmware allows TX measurements on OFDM and OFDMA signals in line with the WiMAX™ IEEE 802.16?2004 and IEEE 802.16e?2005 standards. All WiMAX™ measurement applications are fully remote-controllable via the IEC/IEEE bus or LAN, using SCPI commands. The operating concepts of the different analyzers are largely identical, including the IEC/IEEE bus commands. Analyzers supporting WiMAX™ measurements Rohde & Schwarz offers a wide range of signal and spectrum analyzers for WiMAX™ measurements. The R&S®FSQ-K94 option provides the same user interface for a wide range of different spectrum and signal analyzers, offering optimal solutions for every application. No additional time is needed for transfer of T&M equipment from R&S to production.
Specifications
R&S®FSQ R&S®FMU R&S®FSL R&S®FSV R&S®FSG
RF performance
Frequency range 20 Hz to 3.6/26.5/40 GHz DC to 36 MHz 9 kHz to 3/6/18 GHz 20 Hz to 3/6/13/30 GHz 9 kHz to 8/13.6 GHz
Resolution bandwidth 1 Hz to 50 MHz 0.5 Hz to 20 MHz 1 Hz to 20 MHz 1 Hz to 40 MHz 1 Hz to 10 MHz
Phase noise at 10 kHz offset, 1 GHz input frequency typ. –129 dBc (1 Hz) typ. –143 dBc (1 Hz), (10 MHz input frequency) typ. –97 dBc (1 Hz) typ. –106 dBc (1 Hz) typ. –114 dBc (1 Hz)
Overall measurement uncertainty 0.3 dB (f < 3.6 GHz) 0.3 dB 0.5 dB (f < 3 GHz) 0.4 dB (f < 7 GHz) 0.3 dB (f < 3.6 GHz)
DANL typ. –156 dBm (at 1 GHz, 1 Hz RBW) typ. –151.5 dBm typ. –142 dBm (at 1 GHz, 1 Hz RBW), typ. –152 dBm (at 1 GHz, 1 Hz RBW, with preamplifier ON) –152 dBm typ. –155 dBm (at 1 GHz, 1 Hz RBW), typ. –162 dBm (at 1 GHz, 1 Hz RBW, with preamplifier ON)
TOI typ. 27 dBm – typ. 15 dBm typ. 17 dBm typ. 25 dBm
I/Q demodulation
I/Q demodulation bandwidth 28 MHz, optionally 120 MHz (R&S®FSQ-B72) 72 MHz 28 MHz (R&S®ZVL:20 MHz) 28 MHz, 40 MHz (R&S®FSV-B70 option) 28 MHz
I/Q memory 16 Msample, optionally 235/705 Msample 16 Msample, optionally 235/705 Msample 512 ksample 200 Msample 4 Msample
I/Q baseband inputs optional, 50 ?/1 M?(R&S®FSQ-B71) 50 ?/1 M? (balanced, unbalanced) – – –
LXI Class C compliant v v v v v
Digital baseband interface v v – – v
WiMAXTM
Residual EVM (f = 3.5 GHz, 0 dBm, typical values of WiBro signal) typ. –52 dB typ. –52 dB (baseband) typ. –40 dB typ. –45 dB typ. –49 dB
ACLR with noise correction typ. 80 dB typ. 69 dB (without noise correction) typ. 58 dB typ. 70 dB typ. 80 dB
Measurement speed (bandwidth 8.75 MHz, six data symbols) typ. 7 frames/s – typ. 6 frames/s typ. 6 frames/s typ. 7.0 frames/s
MIMO v – – – v
''