Descrizione

Key Facts The R&S®FSL-K8 application firmware enhances the range of applications of the R&S®FSL spectrum analyzer to include measurements on Bluetooth® transmitters. All measurements are carried out in line with the Bluetooth® RF Test Specification (Bluetooth® SIG) Rev. 2.0+EDR and cover basic rate as well as EDR. Integrated limit value monitoring is provided for all measurements and allows analysis of the results in the development and production of Bluetooth® modules. The R&S®FSL-K8 is also available for the R&S®ZVL3 and R&S®ZVL6 Vector Network Analyzers (with the R&S®ZVL-K1 spectrum analysis option).
Features & Benefits
  • Bluetooth measurement
  • Basic rate measurements
    • Output power
    • ACP over up to 79 channels
    • Modulation characteristics
    • Initial carrier frequency tolerance
    • Carrier frequency drift
  • EDR measurements
    • Output power and relative transmit power
    • Inband spurious emissions, gated
    • Carrier frequency stability and modulation accuracy (DEVM)
    • Differential phase encoding

Specifications
Measurements fur Basic Rate Range Uncertainty
average and peak power according to Bluetooth® RF test specification 2.0.E.3, 5.1.3 –40 dBm to +20 dBm < 0.7 dB
FM deviation according to Bluetooth® RF test specification 2.0.E.3, 5.1.9 ?f1max, ?f2max, ?f1avg, ?f2avg and ?f2avg/?f1avg ±250 kHz <6 kHz(signal level>–25 dBm, 10 averages)
ICFT according to Bluetooth® RF test specification 2.0.E.3, 5.1.10 ±250 kHz <3 kHz + carrier frequency ? reference error(signal level>–30 dBm)
Carrier frequency drift according to Bluetooth® RF test specification 2.0.E.3, 5.1.11 drift/packet and drift/50 µs ±250 kHz <5 kHz(signal level>–30 dBm)
adjacent channel power according to Bluetooth® RF test specification 2.0.E.3, 5.1.8
GFSK and DPSK power according to Bluetooth® RF test specification 2.0.E.3, 5.1.12 –40 dBm to +20 dBm <0.7 dB
Frequency error initial (?i), per block (?0) and total (?i+?0) according to Bluetooth® RF test specification 2.0.E.3, 5.1.13 ±250 kHz Initial frequency error <1 kHz + carrier frequency ? reference error Frequency error per block: <1 kHz
RMS, Peak und 99% DEVM according to Bluetooth® RF test specification 2.0.E.3, 5.1.13 <3 % (RMS) <8 % (Peak)
Bit error detection according to Bluetooth® RF test specification 2.0.E.3, 5.1.14
Adjacent channel power and power between 1 MHz and 1.5 MHz from the carrier according to Bluetooth® RF test specification 2.0.E.3, 5.1.15
''